L&L KILN SERIES:
Easy-Load Kilns
KILN:

EL3048 Front-Loading Kiln

Industrial Grade Front-Loader

KILN:

EL3048 Front-Loading Kiln

Industrial Grade Front-Loader

    KEY SPECS
  • Front-Loading Kilns
  • Large
    (25 cubic feet)
  • Genesis Multi-Zone Touchscreen Control
  • Cone 10, 2350F, 1290C
$34,400
ESTIMATED LEAD TIME: 8 to 12 Weeks
See Lead Times & Confirmation Process
WHERE TO BUY
PDF Brochure Dimension Diagram Instructions

Model EL3048 Easy-Load Front-Loading kiln with Multi-Program Three-Zoned DynaTrol, hard ceramic element holders, protected thermocouples, separate attached stand, cool-firing separate side-mounted panel, multi-layered insulation (3" K23 firebrick with 2" back up mineral wool), full arch 4-1/2" thick firebrick roof made of harder K25 firebrick, side, back and door elements, door gasket, heavy gauge welded case that is powder-coated hammertone blue for corrosion resistance, manual vent system with roof plug and bottom inlet holes with sliding damper. 31" Wide x 32-1/2" Deep x 49" High (25 cubic feet). There are three thermocouples. No charge for 3-phase versions. MET-us is listed in the USA. Direct power connection. Cone 10 for all voltages. 

Schedule a free consultation now by emailing industry@hotkilns.com

See the Crating Charges and Export Options

Easy-Load Shipping Quote Form

Easy-Load Installation Checklist

Easy-Load Kilns include Genesis Touchscreen Zone Control

Furniture Kit for EL3048 Easy-Load
  • Part Number:
    H-B-3048/00
  • Includes: Twelve 14" x 28" Rectangular Shelves (3/4" thick), Twelve Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
  • Price:
    $1,825.00
  • Insulation:
    3" K23 Firebrick with 2" Mineral Wool Back-Up Insulation
  • Sections:
    One section
  • Inside Dimensions:
    31.00"
    Wide x
    32.00"
    Deep x
    48.00"
    High (78.74 cm Wide x 81.28 cm Deep x 121.92 cm High)
  • Outside Dimensions:
    56.00"
    Wide x
    50.00"
    Deep x
    80.00"
    High (142.24 cm Wide x 127 cm Deep x 203.2 cm High)
  • Weight:
    1930
    lbs (875 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-B-3048/21 EL3048-208-1Ph 31,500 208 Single Phase 200 Amp
  • Additional Information
  • Amps: 151.4
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 250 mcm
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-3048/22 EL3048-208-3Ph 31,500 208 Three Phase (Delta) 100 Amp
  • Additional Information
  • Amps: 87.4
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-3048/31 EL3048-240-1Ph 31,500 240 Single Phase 175 Amp
  • Additional Information
  • Amps: 131.3
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-3048/32 EL3048-240-3Ph 31,500 240 Three Phase (Delta) 100 Amp
  • Additional Information
  • Amps: 75.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-3048/62 EL3048-480-3Ph 31,500 460-480 Three Phase (Delta) 50 Amp
  • Additional Information
  • Amps: 37.9
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-3048/41 EL3048-220-1Ph 31,500 220-230 Single Phase 200 Amp
  • Additional Information
  • Amps: 143.2
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 250 mcm
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-3048/52 EL3048-380-3PY 31,500 380 Three Phase (Wye) 60 Amp
  • Additional Information
  • Amps: 47.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-3048/82 EL3048-400-3PY 31,500 400 Three Phase (Wye) 60 Amp
  • Additional Information
  • Amps: 45.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-3048/72 EL3048-415-3PY 31,500 415 Three Phase (Wye) 60 Amp
  • Additional Information
  • Amps: 43.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):

Control

Genesis Touch Screen Control
Automatic Zone Control
EVEN FIRING. MAKES LOADING MORE FLEXIBLE. ADJUSTS FOR ELEMENT AGING. No need to pay extra for this important feature! Zone control on an electric kiln gives you the utmost controllable temperature uniformity. The kiln control separately measures temperatures in the bottom, middle, and top of the ceramic kiln and automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.
Industrial Wiring (DaVinci & Easy-Load)
PROFESSIONAL AND CLEAN LAYOUT. DaVinci Panels are wired to industrial standards with a good clean wire layout.
Mercury Free Contactors
HEAVY-DUTY. Power Relays are mercury-free to comply with increasing regulations and concerns about mercury. Solid State Contactors are available as an option on most L&L Kilns.
On-Off Switch and Panel Fuse
WHY WOULDN'T YOU HAVE AN ON-OFF SWITCH? All L&L Kilns come with an on-off switch and panel-mounted control fuse. We do not rely on kiln control to keep the kiln off.

Durability

Protected Thermocouples
KEEP YOUR WORK CLEAN. Ceramic protection tubes protect the end of the thermocouple. Keeps the oxide dust from the thermocouple tip from getting into the kiln while firing.
Heavy-Duty Type K Thermocouples
HEAVY-DUTY. Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Hard Ceramic Element Holders Make L&L Kilns More Durable
NO PINS TO REPLACE AND DAMAGE YOUR FIREBRICK! Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Arched Roof (Easy-Load)
F4-1/2" STRONG FIREBRICK ARCH IS BUILT THE OLD-FASHIONED WAY. Arched roofs are the time-proven way to build a long-lasting front-loading kiln
Solid Wide-View Peephole Plugs
STOP BREAKING PEEPHOLE PLUGS. Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow-type plugs used on competitors' kilns.
Powder-Coated Thick Welded Case (Easy-Load)
A BEAUTIFUL EXTERIOR FOR A BEAUTIFUL KILN. A thick welded steel case holds up better to corrosion over time.

Performance

Manual Venting System for Cooling Front-Loading Kilns
COOL YOUR KILN WITHOUT OPENING THE DOOR. This is for cooling purposes and does not replace the Vent-Sure automatic kiln vent.
Thermal Ceramics Firebrick
K23 firebrick combines good insulation with strength

Ease of Use

Strong Door Latches (Easy-Load)
STRONG AND SECURE. Two strong door latches secure the door. They are adjustable.

Support

Two-Year Commercial Limited Warranty
A SPECIAL WARRANTY FOR SPECIAL CUSTOMERS. Easy-Load and Bell-Lift Kilns have a Two-Year Commercial Limited Warranty.
Superior Technical Support
LET OUR EXPERIENCE WORK FOR YOU. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We work as a team to help you get your answers and help.
Visual Detailed Instruction Manual
LIKE HAVING A KILN LIBRARY AT YOUR FINGERTIPS. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices, and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.

Safety

Door Shut-Off Switch (Easy-Load, eFL Series)
EXTRA SAFETY FOR FRONT-LOADING KILNS. Shuts off power to kiln when the door is open
Listed to UL499 Standard by MET
CERTIFIED SAFE. Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire Pottery Kilns, eQad-Pro Professional Kilns, eFL Front-Loading Kilns, Jupiter Sectional Kilns, DaVinci Square & Rectangular Production Kilns, School-Master School Kilns, Fuego Home Craft Kilns, and Doll-Test Kilns. Easy-Load Production Front-Loading kilns are MET-Us Listed for the USA only.

Elements

APM Sintered Powder Metal Elements
APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples
Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil Metal Sheathed Industrial Thermocouples
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Vents

Vent-Sure Downdraft Kiln Vent System
A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
Vent Control Programmed on DynaTrol & Genesis
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).

Kiln Furniture

Furniture Kits
Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.
Safety Gloves
These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

Solid State Relays
Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.
Electronic High Limit Back Up Control
Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.
DynaTrol Keypad Control
Traditional 24-button Keypad control. This control can be substituted for any Genesis full-sized control.

Power

480 Volt Option
L&L's 480 volt option can include a NEMA 1 control panel
120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns
This option helps protect your control from electrical noise

Shipping/Crating

Crating for Easy-Load Kilns
  • Kiln:
    60 IN Wide X 65 IN Deep X 87 IN High
    (
    153 CM Wide X 166 CM Deep X 221 CM High
    )
  • Ship Weight:
    2080
    lbs (943 kg)
  • Kiln with Furniture Kit:
    Skid #1: 60 IN Wide X 65 IN Deep X 87 IN High | Skid #2: 42 IN Wide X 48 IN Deep X 36 IN High
    (
    Skid #1: 153 CM Wide X 166 CM Deep X 221 CM High | Skid #2: 107 CM Wide X 122 CM Deep X 92 CM High
    )
  • Ship Weight:
    2330
    lbs (1057 kg)
  • Kiln with Vent:
    Skid #1: 60 IN Wide X 65 IN Deep X 87 IN High | Skid #2: 42 IN Wide X 48 IN Deep X 36 IN High
    (
    Skid #1: 153 CM Wide X 166 CM Deep X 221 CM High | Skid #2: 107 CM Wide X 122 CM Deep X 92 CM High
    )
  • Ship Weight:
    2095
    lbs (950 kg)
  • Kiln with Vent and Furniture Kit:
    Skid #1: 60 IN Wide X 65 IN Deep X 87 IN High | Skid #2: 42 IN Wide X 48 IN Deep X 36 IN High
    (
    Skid #1: 153 CM Wide X 166 CM Deep X 221 CM High | Skid #2: 107 CM Wide X 122 CM Deep X 92 CM High
    )
  • Ship Weight:
    2345
    lbs (1064 kg)
  • Packaging:

    See the Easy-Load Crating Charges and Export Options

Turntable View

EL3048 Front-Loading Kiln
Compare L&L Kilns
X3227-BL Bell-Lift Kiln T3436-BL Bell-Lift Kiln T3436-D Electric Kiln
Kiln X3245-BL Bell-Lift Kiln T3436-BL Bell-Lift Kiln T3436-D Electric Kiln
Description

Bell-Lift design makes loading easy. Kiln moves up and there is access from all four sides. 

Bell-Lift design makes loading easy. Kiln moves up and there is access from all four sides. 

Large Rectangular Sectional Kiln
Price $34,225.00 $32,500.00 $13,650.00
Type Bell-Lift Kilns Bell-Lift Kilns Pull-Apart Kilns
Volume 24.2 cubic feet 27.6 cubic feet 27.6 cubic feet
Temperature Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C