CRAFT/TEST KILNS

CRAFT/TEST KILNS

Home> All L&L Kiln Series> CRAFT/TEST KILNS
KILN:

Plug-n-Fire

8" X 8" X 9" home and test kiln

KILN:

Plug-n-Fire

8" X 8" X 9" home and test kiln

    KEY SPECS
  • Small
    (0.33 cubic feet)
  • Genesis Mini Touchscreen Control
  • Cone 10, 2350F, 1290C
$1,685
ESTIMATED LEAD TIME: 8 to 10 Weeks
See Lead Times & Confirmation Process
WHERE TO BUY
Spec Sheet Drawing Instructions

Model PF8 Craft/Test Kiln with a Genesis Mini Touchscreen Controller

  • 8" Square x 9" High (0.33 cu ft)
  • This kiln can fire to Cone 10 on a standard 15-amp circuit, and draws only 12.5 amps
  • Extra-insulated sides with 2-1/2" K23 brick and 1" of backup insulation; Top & Bottom are 3" K23 brick
  • Kiln plugs into a separate control panel with power and thermocouple wire jack
  • Door safety switch shuts off power to the elements when the door is opened
  • Hard ceramic element channels
  • Includes one 7" by 7" by 3/8" shelf and three 4" posts
  • Not yet listed to UL499

Includes Genesis-Mini Touchscreen Control

  • Insulation:
    2-1/2" K23 Firebrick & 1" 1900 Back-Up Insulation on sides, 3" K23 Firebrick on top & bottom
  • Sections:
    One section
  • Inside Dimensions:
    8.00"
    Wide x
    8.00"
    Deep x
    9.00"
    High (20.32 cm Wide x 20.32 cm Deep x 22.86 cm High)
  • Outside Dimensions:
    16.00"
    Wide x
    19.00"
    Deep x
    20.00"
    High (40.64 cm Wide x 48.26 cm Deep x 50.8 cm High)
  • Weight:
    77
    lbs (35 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-D-PF8X/10 PF8 1500 120 Single Phase 15 Amp
  • Additional Information
  • Amps: 12.5
  • Wire Connection: 5-15P Plug (15 amp, 120 volt)
  • Wire Gauge for Connection: 14 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: Not listed to UL499
  • Wiring Diagram(s):
K-D-PF8X/2C PF8-230-EU 1800 220-230 Single Phase 10 Amp
  • Additional Information
  • Amps: 7.8
  • Wire Connection: European "CEE 7/7" type Plug 15 Amp Household Plug
  • Wire Gauge for Connection: 14 Ga
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: Not listed to UL499
  • Wiring Diagram(s):
K-D-PF8X/2U PF8-230-UK 1800 220-230 Single Phase 10 Amp
  • Additional Information
  • Amps: 7.8
  • Wire Connection: UK 15 Amp Household Plug
  • Wire Gauge for Connection: 14 Ga
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: Not listed to UL499
  • Wiring Diagram(s):

Control

Genesis Touch Screen Control
The Genesis control includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. A free phone app allows you to monitor your kiln remotely.
Angled Control Panel
EASY TO SEE AND PROGRAM THE CONTROL. Angled control panel makes viewing control and programming easier.

Durability

Hard Ceramic Element Channels
NO PINS TO REPLACE AND DAMAGE YOUR FIREBRICK! Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
"No Crimp" Ceramic Element Connections
NO CRIMPING! EASY TO CHANGE. Industrial-grade ceramic terminal blocks make changing elements easy. All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers. Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.
Heavy-Duty Type K Thermocouples
HEAVY-DUTY. Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Full-Support Stand
FULL SUPPORT STAND. Aluminized stands are solid and corrosion-resistant. They offer solid support under the kiln - unlike spot-welded angle stands that are common in the industry.

Support

Three-Year Limited Warranty (Standard)
THIS IS REALLY IMPORTANT WHEN YOU CONSIDER THE ELECTRONIC CONTROL. Most L&L Kilns have a three-year limited warranty.
  • Kiln:
    (2 boxes 50 lbs each) 22" x 24" x 41cm High (Each)
    (
    56cm x 61cm x 16" High
    )
  • Ship Weight:
    95
    lbs (43 kg)
  • Kiln with Furniture Kit:
    (2 boxes 50 lbs each) 22" x 24" x 41cm High (Each)
    (
    56cm x 61cm x 16" High
    )
  • Ship Weight:
    100
    lbs (45 kg)
  • Packaging:
    Packaged for UPS or FedEx
Compare L&L Kilns
DL11-D Test Kiln DL11-D Test Kiln
Kiln DL11-D Test Kiln DLH11-DX Test Kiln
Description

Doll & Test Kiln

Doll & Test Kiln
Price $1,950.00 $1,950.00
Type
Volume 0.5 cubic feet 0.5 cubic feet
Temperature Cone 5, 2170F, 1190C Cone 10, 2350F, 1290C