T-G-MKIT/LG
$9.60
Mounting Kit for Long Type K Thermocouples - Kit includes two #8 3" Screws, six 1/2" high Ceramic Spacers, and is used for all Pyrocil Type K and all Long 8 Gauge Type K (Exposed) Thermocouples
SHOP KILN PARTS
SUBCATEGORIES
T-G-OPTB/00
$45.00
Mullite Thermocouple Protection Tube - Unit is 5" Long x 1" Diameter with a stepped head for use with All Standard Length Type-K 8 Ga. Thermocouples. NOTE: This is the newer type open end tube which was put in service with new kilns starting in September 2020.
NO IMAGE
T-G-TUBE/07
$59.00
Mullite Thermocouple Protection Tube - Unit is 7" Long x 1" Diameter with a stepped head for use with all Longer Length Type-K 8 Ga. Thermocouples. NOTE: This is the newer type open end tube which was put into service for new kilns starting in November 2020.
T-G-MKIT/00
$9.60
Mounting Kit for Type-K 8 Gauge Thermocouples - Kit includes two #6 1-1/2" Screws, six 1/4" high Ceramic Spacers. (note that the photo does not represent this exactly)
L-G-TRTC/EF
$30.00
Thermocouple Terminal Strip - Unit has Six 3/16" Spade Terminals on each side, comes with a Terminal Strip Marker Board and is used for the Thermocouple Wires on piggybacked Control Panels
T-G-HSDL/HT
$30.00
Type-K Thermocouple Wire Control Harness - Unit is precut, fitted with the appropriate terminal ends, bundled, and labeled to run from the Thermocouple Terminal Strip to the Genesis Mini on Doll Kilns
T-G-E800/EL
$23.75
Type-K 8 Gauge Thermocouple (Exposed) with Element ONLY - no Terminal Block - Metal element is 6" Long with a 4" long ceramic insulator tube that is 1/2" diameter. The negative wire is marked with red.
T-G-E807/00
$58.00
Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/2" Diameter
T-G-E800/00
$50.00
Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Ceramic tube is 4" Long x 1/2" Diameter.
T-G-E23M/05
$105.00
Type-K Industrial Grade Pyrocil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 5" Long x 1/4" Diameter. Used on DaVinci, Jupiter, Easy-Fire and other kilns with 2-1/2" or 3" brick walls.
T-G-E23M/06
$105.00
Type-K Industrial Grade Pyrocil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/4" Diameter. Used on Hercules and Easy-Load kilns where wall thickness is 5".
T-G-SXXX/00
$410.00
Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 120 mm (4-3/4") Long x 1/4" Diameter.
Used on JH Series kilns (as standard), optional on Easy-Fire, Jupiter, DaVinci, eFL Series, Easy-Fire XT, Bell-Lift, Doll with DynaTrol)
T-G-S180/08
$435.00
Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 180 mm (7") Long x 1/4" Diameter. Used on Hercules and Easy-Load kilns where wall thickness is 5".
