L&L KILN SERIES:
Davinci Square & Rectangular Kilns
KILN:

T3427-D-PB Electric Kiln

Large Rectangular Sectional Kiln

KILN:

T3427-D-PB Electric Kiln

Large Rectangular Sectional Kiln

    KEY SPECS
  • Large
    (20.7 cubic feet)
  • Genesis Multi-Zone Touchscreen Control
  • Cone 10, 2350F, 1290C
  • Powered Bottom
$13,350
ESTIMATED LEAD TIME: 8 to 12 Weeks
See Lead Times & Confirmation Process
WHERE TO BUY
PDF Brochure Dimension Diagram Instructions

Model T3427-D-PB Square Automatic DaVinci Kiln with a Multi-Program Three-Zoned DynaTrol control. Floor-standing control panel. Sectional and modular construction allows future expansion aided by the unique adjustable spring-loaded counterbalanced welded and powder-coated hinge system (Note: the lid on this model is a two-person lift). The stand is made of formed galvannealed steel. ides are made of specially machined arched bricks for strength. Kiln comes with hard ceramic element holders, protected thermocouples, and solid peephole plugs. 43-1/2" Wide x 30-1/2" Deep x 27" High (20.7 cubic feet). Includes a powered bottom that operates from a separate adjustable circuit on the DynaTrol. 3" K23 brick. Direct power connection. Three thermocouples. No charge for 3-phase versions. C-MET-us is listed in the USA & Canada. Cone 10 all voltages. 

See the Crating Charges and Export Options here.

See this Checklist before ordering

DaVinci Kilns include Genesis Touchscreen Zone Control

Furniture Kit for T3427 DaVinci
  • Part Number:
    H-T-K527/00
  • Includes: Nine 28" X 14" X 3/4" Rectangular Shelves (3/4" thick), Twelve Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
  • Price:
    $1,600.00
  • Insulation:
    3" K23 Firebrick
  • Sections:
    Three 9" high sections
  • Inside Dimensions:
    43.50"
    Wide x
    30.50"
    Deep x
    27.00"
    High (110.49 cm Wide x 77.47 cm Deep x 68.58 cm High)
  • Outside Dimensions:
    76.00"
    Wide x
    53.00"
    Deep x
    84.00"
    High (193.04 cm Wide x 134.62 cm Deep x 213.36 cm High)
  • Weight:
    1065
    lbs (483 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-T-342P/21 T3427-D-PB-208-1Ph 30,477 208 Single Phase 200 Amp
  • Additional Information
  • Amps: 146.5
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 250 mcm
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-T-342P/22 T3427-D-PB-208-3Ph 30,477 208 Three Phase (Delta) 125 Amp
  • Additional Information
  • Amps: 93.2
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-T-342P/31 T3427-D-PB-240-1Ph 30,477 240 Single Phase 175 Amp
  • Additional Information
  • Amps: 127
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-T-342P/32 T3427-D-PB-240-3Ph 30,477 240 Three Phase (Delta) 100 Amp
  • Additional Information
  • Amps: 80.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-T-342P/62 T3427-D-PB-480-3Ph 30,477 460-480 Three Phase (Delta) 50 Amp
  • Additional Information
  • Amps: 40
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Three Elements in Wye with 277 Volts per element
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-T-342S/62 T3427-D-PB-480-3Ph-QD 30,477 460-480 Three Phase (Delta) 60 Amp
  • Additional Information
  • Amps: 40.4
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Two 240V Quad Elements in Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-T-342P/41 T3427-D-PB-220-1Ph 30,477 220-230 Single Phase 175 Amp
  • Additional Information
  • Amps: 138.5
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-T-342P/52 T3427-D-PB-380-3PY 30,477 380 Three Phase (Wye) 80 Amp
  • Additional Information
  • Amps: 63
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 3 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-T-342P/82 T3427-D-PB-400-3PY 30,477 400 Three Phase (Wye) 80 Amp
  • Additional Information
  • Amps: 60.2
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 3 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-T-342P/72 T3427-D-PB-415-3PY 30,477 415 Three Phase (Wye) 80 Amp
  • Additional Information
  • Amps: 57.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 3 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):

Control

Genesis Touch Screen Control
Automatic Zone Control
EVEN FIRING. MAKES LOADING MORE FLEXIBLE. ADJUSTS FOR ELEMENT AGING. No need to pay extra for this important feature! Zone control on an electric kiln gives you the utmost controllable temperature uniformity. The kiln control separately measures temperatures in the bottom, middle, and top of the ceramic kiln and automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.
Industrial Wiring (DaVinci & Easy-Load)
PROFESSIONAL AND CLEAN LAYOUT. DaVinci Panels are wired to industrial standards with a good clean wire layout.
Floor-Standing Panel Away from Kiln (DaVinci)
ALLOWS THE SECTIONS TO PLUG IN WHILE SEPARATE FROM THE KILN. The control panel is mounted on a stand away from the kiln.
Mercury Free Contactors
HEAVY-DUTY. Power Relays are mercury-free to comply with increasing regulations and concerns about mercury. Solid State Contactors are available as an option on most L&L Kilns.
On-Off Switch and Panel Fuse
WHY WOULDN'T YOU HAVE AN ON-OFF SWITCH? All L&L Kilns come with an on-off switch and panel-mounted control fuse. We do not rely on kiln control to keep the kiln off.

Durability

Protected Thermocouples
KEEP YOUR WORK CLEAN. Ceramic protection tubes protect the end of the thermocouple. Keeps the oxide dust from the thermocouple tip from getting into the kiln while firing.
Heavy-Duty Type K Thermocouples
HEAVY-DUTY. Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Hard Ceramic Element Holders Make L&L Kilns More Durable
NO PINS TO REPLACE AND DAMAGE YOUR FIREBRICK! Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Strong Arched Sides with Extra Airspace (DaVinci)
EXTRA SPACE GIVES YOUR WORK BREATHING ROOM. Arched sides on DaVinci kilns are very strong and promote good air circulation
Steel Frame Supports Lid (DaVinci)
STRONG PERIMETER FOR THE DAVINCI LID. A unique welded rigid frame supports the entire lid on a DaVinci kiln.
Welded Angle Iron Stand (DaVinci)
Welded heavy-duty stand supports heavy loads. Alumized top sheet reflects heat.
Molded Ceramic Element Connections
NO CRIMPING! EASY TO CHANGE. Industrial-grade ceramic terminal blocks make changing elements easy. All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers. Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.
Solid Wide-View Peephole Plugs
STOP BREAKING PEEPHOLE PLUGS. Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow-type plugs used on competitors' kilns.
Corrosion Resistant Case
KEEP YOUR KILN LOOKING NEW. Corrosion resistant materials and methods result in a long-lasting kiln.
Extra Case Clamps
Three case clamps per 9" high kiln section are redundant safety for your L&L kiln.

Performance

Powered Bottom for DaVinci Kilns
WHEN YOU NEED EXTRA POWER FOR DENSE LOADS
Powered Bottom for DaVinci Kilns
WHEN YOU NEED EXTRA POWER FOR DENSE LOADS
Thermal Ceramics Firebrick
K23 firebrick combines good insulation with strength

Ease of Use

Spring-Loaded Lid For Easy Opening and Gentle Closing of DaVinci
EASY-LIFT LID SAVES ON WEAR AND TEAR. All but the T3400 DaVinci lids can easily be lifted by one person. T3400 models need two persons to lift.

Serviceability

Sectional Kiln Construction for DaVinci Kilns
EXPAND AND CONTRACT YOUR DAVINCI KILN WITH THE ADJUSTABLE HINGE. Sectional kiln construction makes DaVinci kilns easy to move, set up and disassemble for maintenance. Kiln Sections all plug into a separate control panel making the kiln easy to take apart and reconfigure.

Support

Three-Year Limited Warranty (Standard)
THIS IS REALLY IMPORTANT WHEN YOU CONSIDER THE ELECTRONIC CONTROL. Most L&L Kilns have a three-year limited warranty.
Superior Technical Support
LET OUR EXPERIENCE WORK FOR YOU. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We work as a team to help you get your answers and help.
Visual Detailed Instruction Manual
LIKE HAVING A KILN LIBRARY AT YOUR FINGERTIPS. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices, and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.

Safety

Listed to UL499 Standard by MET
CERTIFIED SAFE. Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire Pottery Kilns, eQad-Pro Professional Kilns, eFL Front-Loading Kilns, Jupiter Sectional Kilns, DaVinci Square & Rectangular Production Kilns, School-Master School Kilns, Fuego Home Craft Kilns, and Doll-Test Kilns. Easy-Load Production Front-Loading kilns are MET-Us Listed for the USA only.

Elements

Quad Element Option
The combination of 1/2" diameter element coils, the doubled surface area of the Quad element design, and superior heat transfer of L&L's patented ceramic element holders, make this the best element system in the world today.
APM Sintered Powder Metal Elements
APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples
Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil Metal Sheathed Industrial Thermocouples
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Vents

Vent-Sure Downdraft Kiln Vent System
A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
Vent Control Programmed on DynaTrol & Genesis
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).

Kiln Furniture

Furniture Kits
Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.
Safety Gloves
These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

Solid State Relays
Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.
Electronic High Limit Back Up Control
Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.
DynaTrol Keypad Control
Traditional 24-button Keypad control. This control can be substituted for any Genesis full-sized control.

Power

480 Volt Option
L&L's 480 volt option can include a NEMA 1 control panel
120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns
This option helps protect your control from electrical noise
Powered Bottoms For DaVinci Kilns
Powered bottoms increase power and can aid uniformity in large kilns

Miscellaneous

Unpowered 4-1/2" High DaVinci Sections
Unpowered rings can extend the height of our DaVinci kilns.
Seismic Kiln Rack and Brace
This special Seismic Kiln Rack and Brace is designed to prevent a kiln from falling over during an earthquake.

Shipping/Crating

Packing Options for DaVinci Kilns
  • Kiln:
    Skid #1: 50 IN Wide X 56 IN Deep X 60 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 93 IN High
    (
    Skid #1: 127 CM Wide X 143 CM Deep X 153 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 237 CM High
    )
  • Ship Weight:
    1215
    lbs (551 kg)
  • Kiln with Furniture Kit:
    Skid #1: 50 IN Wide X 56 IN Deep X 72 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 93 IN High
    (
    Skid #1: 127 CM Wide X 143 CM Deep X 183 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 237 CM High
    )
  • Ship Weight:
    1405
    lbs (637 kg)
  • Kiln with Vent:
    Skid #1: 50 IN Wide X 56 IN Deep X 72 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 93 IN High
    (
    Skid #1: 127 CM Wide X 143 CM Deep X 183 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 237 CM High
    )
  • Ship Weight:
    1230
    lbs (558 kg)
  • Kiln with Vent and Furniture Kit:
    Skid #1: 50 IN Wide X 56 IN Deep X 72 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 93 IN High
    (
    Skid #1: 127 CM Wide X 143 CM Deep X 183 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 237 CM High
    )
  • Ship Weight:
    1420
    lbs (644 kg)
  • Packaging:

    See the DaVinci Crating Charges and Export Options here.

Turntable View

T3427-D-PB Electric Kiln
Compare L&L Kilns
EL2848 Front-Loading Kiln X3236-BL Bell-Lift Kiln
Kiln EL2848 Front-Loading Kiln X3236-BL Bell-Lift Kiln
Description

Industrial Grade Front-Loader

Bell-Lift design makes loading easy. Kiln moves up and there is access from all four sides. 
Price $29,825.00 $30,600.00
Type Front-Loading Kilns Bell-Lift Kilns
Volume 20.0 cubic feet 19.4 cubic feet
Temperature Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C