KILN:

EL2427-H Front-Loading Kiln

Industrial Grade Front-Loader

KILN:

EL2427-H Front-Loading Kiln

Industrial Grade Front-Loader

    KEY SPECS
  • Medium-Large
    (9 cubic feet)
  • DynaTrol Zone Control
  • Cone 10, 2350F, 1290C
$15,250
ESTIMATED LEAD TIME: 16 to 22 Weeks
See Lead Times & Confirmation Process

Model EL2427-H Easy-Load Front-Loading kiln with Multi-Program Three-Zoned DynaTrol, hard ceramic element holders, protected thermocouples, separate attached stand, cool-firing separate side-mounted panel, multi-layered insulation (3" K23 firebrick with 2" back up mineral wool), full arch 4-1/2" thick firebrick roof made of harder K25 firebrick, side, back and door elements, door gasket, heavy gauge welded case that is powder-coated hammertone blue for corrosion resistance, manual vent system with roof plug and bottom inlet holes with sliding damper. 25" Wide x 26" Deep x 27" High (9 cubic feet). Direct power connection. There are three thermocouples. No charge for 3-phase versions. MET-us is listed in the USA. Cone 10 for all voltages. 

 

See the Crating Charges and Export Options

Easy-Load Shipping Quote Form

Easy-Load Installation Checklist

 

Easy-Load Kilns include FREE Zone Control.

  • Part Number:
    H-B-2427/00
  • Includes: Six 11" x 22" Rectangular Shelves (3/4" thick), Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
  • Price:
    $750.00
  • Insulation:
    3" K23 Firebrick with 2" Mineral Wool Back-Up Insulation
  • Sections:
    One section
  • Inside Dimensions:
    25.00"
    Wide x
    25.00"
    Deep x
    27.00"
    High (63.5 cm Wide x 63.5 cm Deep x 68.58 cm High)
  • Outside Dimensions:
    50.00"
    Wide x
    43.00"
    Deep x
    69.00"
    High (127 cm Wide x 109.22 cm Deep x 175.26 cm High)
  • Weight:
    1280
    lbs (581 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-B-2427/21 EL2427-H-208-1P 16,500 208 Single Phase 100 Amp
  • Additional Information
  • Amps: 79.3
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-2427/22 EL2427-H-208-3Ph 16,500 208 Three Phase (Delta) 60 Amp
  • Additional Information
  • Amps: 45.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-2427/31 EL2427-H-240-1Ph 16,500 240 Single Phase 90 Amp
  • Additional Information
  • Amps: 68.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 2 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-2427/32 EL2427-H-240-3Ph 16,500 240 Three Phase (Delta) 50 Amp
  • Additional Information
  • Amps: 39.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-2427/62 EL2427-H-480-3Ph 16,500 460-480 Three Phase (Delta) 25 Amp
  • Additional Information
  • Amps: 19.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 12 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-2427/41 EL2427-H-220-1Ph 16,500 220-230 Single Phase 100 Amp
  • Additional Information
  • Amps: 75
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-2427/52 EL2427-H-380-3PY 16,500 380 Three Phase (Wye) 40 Amp
  • Additional Information
  • Amps: 25
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 8 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-2427/82 EL2427-H-400-3PY 16,500 400 Three Phase (Wye) 30 Amp
  • Additional Information
  • Amps: 23.9
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 10 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):
K-B-2427/72 EL2427-H-415-3PY 16,500 415 Three Phase (Wye) 30 Amp
  • Additional Information
  • Amps: 22.9
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 10 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring:
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: MET-us listed to UL499 Standards in the US only
  • Wiring Diagram(s):

Control

GREAT EASY-TO-USE CONTROL. DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control is included on most kilns. Also see Genesis Touch Screen Option with Phone App for Remote Monitoring.
EVEN FIRING. MAKES LOADING MORE FLEXIBLE. ADJUSTS FOR ELEMENT AGING. No need to pay extra for this important feature! Zone control on an electric kiln gives you the utmost controllable temperature uniformity. The kiln control separately measures temperatures in the bottom, middle, and top of the ceramic kiln and automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.
PROFESSIONAL AND CLEAN LAYOUT. DaVinci Panels are wired to industrial standards with a good clean wire layout.
HEAVY-DUTY. Power Relays are mercury-free to comply with increasing regulations and concerns about mercury. Solid State Contactors are available as an option on most L&L Kilns.
WHY WOULDN'T YOU HAVE AN ON-OFF SWITCH? All L&L Kilns come with an on-off switch and panel-mounted control fuse. We do not rely on kiln control to keep the kiln off.

Durability

KEEP YOUR WORK CLEAN. Ceramic protection tubes protect the end of the thermocouple. Keeps the oxide dust from the thermocouple tip from getting into the kiln while firing.
HEAVY-DUTY. Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
NO PINS TO REPLACE AND DAMAGE YOUR FIREBRICK! Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
F4-1/2" STRONG FIREBRICK ARCH IS BUILT THE OLD-FASHIONED WAY. Arched roofs are the time-proven way to build a long-lasting front-loading kiln
STOP BREAKING PEEPHOLE PLUGS. Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow-type plugs used on competitors' kilns.
A BEAUTIFUL EXTERIOR FOR A BEAUTIFUL KILN. A thick welded steel case holds up better to corrosion over time.
Special brick coating hardens and seals brick for durability and cleaner operation.

Performance

COOL YOUR KILN WITHOUT OPENING THE DOOR. This is for cooling purposes and does not replace the Vent-Sure automatic kiln vent.
K23 firebrick combines good insulation with strength

Ease of Use

STRONG AND SECURE. Two strong door latches secure the door. They are adjustable.

Support

A SPECIAL WARRANTY FOR SPECIAL CUSTOMERS. Easy-Load and Bell-Lift Kilns have a Two-Year Commercial Limited Warranty.
LET OUR EXPERIENCE WORK FOR YOU. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We work as a team to help you get your answers and help.
LIKE HAVING A KILN LIBRARY AT YOUR FINGERTIPS. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices, and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.

Safety

EXTRA SAFETY FOR FRONT-LOADING KILNS. Shuts off power to kiln when the door is open
CERTIFIED SAFE. Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire Pottery Kilns, eQad-Pro Professional Kilns, eFL Front-Loading Kilns, Jupiter Sectional Kilns, DaVinci Square & Rectangular Production Kilns, School-Master School Kilns, Fuego Home Craft Kilns, and Doll-Test Kilns. Easy-Load Production Front-Loading kilns are MET-Us Listed for the USA only.

Elements

APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Vents

A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).

Kiln Furniture

Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.
These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

The new Genesis control from Bartlett includes a touch screen interface and WIFI connectivity added to the proven software of the DynaTrol. A phone app allows you to monitor your kiln remotely.
Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.
Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.
The Eurotherm 2604 is an industrial-grade PID control with two or three zone capability built in.

Power

L&L's 480 volt option can include a NEMA 1 control panel
This option helps protect your control from electrical noise

Shipping/Crating

  • Kiln:
    48 IN Wide X 60 IN Deep X 75 IN High
    (
    122 CM Wide X 153 CM Deep X 191 CM High
    )
  • Ship Weight:
    1380
    lbs (626 kg)
  • Kiln with Furniture Kit:
    48 IN Wide X 60 IN Deep X 75 IN High
    (
    122 CM Wide X 153 CM Deep X 191 CM High
    )
  • Ship Weight:
    1465
    lbs (665 kg)
  • Kiln with Vent:
    48 IN Wide X 60 IN Deep X 75 IN High
    (
    122 CM Wide X 153 CM Deep X 191 CM High
    )
  • Ship Weight:
    1395
    lbs (633 kg)
  • Kiln with Vent and Furniture Kit:
    48 IN Wide X 60 IN Deep X 75 IN High
    (
    122 CM Wide X 153 CM Deep X 191 CM High
    )
  • Ship Weight:
    1480
    lbs (671 kg)
  • Packaging:

Turntable View

EL2427-H Front-Loading Kiln
Compare L&L Kilns
e28T-3 Pottery Kiln eQ2827-3 Production Kiln X2827-D Electric Kiln
Kiln e28T-3 Pottery Kiln eQ2827-3 Production Kiln X2827-D Electric Kiln
Description

Flagship Multi-Purpose Kiln

Production Pottery Kiln

Large Rectangular Sectional Kiln

Price $5,000.00 $6,450.00 $9,450.00
Type Polygonal Kilns Polygonal Kilns Square & Rectangular Kilns
Volume 10.2 cubic feet 10.2 cubic feet 11.0 cubic feet
Temperature Cone 5, 2170F, 1190C Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C