Installation

Home >

Where do T1, TC2 and TC3 go on a kiln?

Two Zone Kiln (2 sections)

TC1 is the top and TC2 is the bottom.

Three Zone Kiln (with 3 sections)

TC1 is the top, TC2 is the middle and TC3 is the bottom.

How to calculate ventilation requirements for removing heat from a kiln room

To calculate how many CFM of air ventilation you need moving through a kiln room

What wire gauge should you use for along wire run to your kiln?

The wire gauge recommendations in our "Wire Gauge for Connection" specifications are based on relatively short lengths of wire up to about 25 feet.

How to pack a kiln for moving

  1. Remove the stand and the bottom.
  2. Put the kiln on a firm surface like a skid with a piece of plywood on it and put a 1" piece of styrofoam on the wood.
  3. Then put the kiln with th

If you are using a hood type vent (like the Vent-a-Kiln) do you need a kiln vent (like the Vent-Sure) also?

You need to vent fumes from the kiln and the room and heat from the room.

How to create an interlock that prevents the kiln from firing unless an external ventilation system in on?

A customer asks if he can interlock his automatic kiln so that it will not fire unless his ventilation system is on. How do you accomplish this?

Syndicate content