MOST MODELS RATE TO CONE 10 - 2350F - 1287C

• Hot enough to fire stoneware and porcelain.
• The 18" high J23 and J2918 are only rated to Cone 5 because of the greater percentage of unheated surface area in the kiln (unless you get a powered bottom).

CHOICE OF 2-1/2" OR 3" BRICK

• 2-1/2" Premium grade K23 firebrick is standard
• 3" Brick is optional

LARGE 1" DIAMETER PEEPHOLES

• Peepholes are a full one inch diameter and are not tapered.
• Better view inside kiln
• Less chance of breakage

MULTI-ZONE DESIGN

• Whether you order a manual or an automatic control, every Jupiter kiln is multi-zoned.
• Each 9" section (and optional powered bottom) has its own separate contactor or manual infinite switch.
• In the case of the four or five section automatic kilns the middle sections operate together as one zone.
• For automatic kilns the optional powered bottom is tied into the bottom zone. However, the DynaTrol allows you to adjust how much of the bottom's power is used (from 10% to 100%).

A LONG AND DISTINGUISHED PEDIGREE

• Jupiter kilns are based on the long and well respected Econo-Kiln line that L&L has made for over 35 years. We have simply improved the line.
  

DYNATROL AUTOMATIC CONTROL - WITH FOUR EASY CERAMIC PROGRAMS

• The DynaTrol with "Dynamic Zone Control" replaces manual switches
  and the Dawson kiln sitter/timer. .
• Operation of the kiln, including zone control for even firing, is completely automated.
• There are four easy-to-use "Easy-Fire" ceramic programs.
• There are six user defined programs for more sophisticated firing.

DYNAMIC ZONE CONTROL FOR EVEN FIRING

• Dynamic Zone Control automatically controls a top, middle and bottom zone for accuracy better than 1/2 cone top to bottom.
• L&L does not charge extra for this great feature - others do.
  

Manual Jupiters Feature...

MULTI-ZONE CONTROL WITH INFINITE ZONE SWITCHES

• Infinitely variable input switches (one for each section) adjust thermal gradients to prevent uneven heating. These control the power contactors.
• They are more adjustible than simple High-Medium-Low type switches.
• Switches have an off position.
  

DAWSON KILN SITTER/TIMER

• A Dawson LT3 (with back-up safety timer) shuts kiln off.
• The Dawson is mounted several inches away from kiln case (with air in between) in its own separate panel box to keep it cool and improve the contactor life.

PILOT LIGHTS FOR EACH ZONE

OPTIONAL TRU-VIEW PYROMETER SYSTEM

More Options to customize your Jupiter Kiln...

OPTIONAL POWER VENT-SURE KILN VENT

• Safest Vent Made - fumes are under vacuum
• Strongest Vent Made - you can vent two kilns
• Most Durable Vent Made - the motor is away from the heat

OPTIONAL POWERED BOTTOMS

OPTIONAL 480 VOLTS FOR J2900 (29" DIAM) KILNS

OPTIONAL UNPOWERED 4-1/2" HIGH SECTIONS

• 4-1/2" high unheated sections are available for slightly increasing kiln height without adding power. These can adversely affect heat-up time, maximum temperature and temperature uniformity so we don't normally recommend them but we do make them available.

OPTIONAL POWERED SECTIONS

OPTIONAL "PULL APART" KILN

• A few minor design changes make the Jupiter kilns easy to dismantle and reassemble to solve unusual loading problems such as firing high sculptures.

OPTIONAL DAWSON KILN SITTER FOR BACK UP SAFETY

• A Dawson kiln sitter (without timer) may be optionally ordered as a back-up device for an additional $425.
• This will shut off the kiln in the event of a control malfunction.
  

OPTIONAL 120 VOLT CONTROL POWER WITH NOISE FILTER

• This option is for people with unstable power grids.

DYNA-GLOW CERAMIC ELEMENT HOLDERS

• Protects Firebrick - Results in Much Longer Kiln Life.
  
• Better Heat Distribution
• Protects Element
• Protects rim of kiln by structurally supporting brick
• The shallow cut required by the unique L&L Dyna-Glow element holders makes brick even more energy efficient.

BRICK HARDENED WITH SPECIAL COATING & HARDENER

• This is one reason L&L Kilns last so long
• The shallow cut required by the unique L&L Dyna-Glow element holders makes brick even more energy efficient.
• Every exposed brick surface is coated

THREE ADJUSTABLE CASE CLAMPS PER SECTION

STAINLESS STEEL CLIPS HOLD LID IN PLACE

• Lid is held more securely than in many other kilns

CORROSION RESISTANT MATERIALS

• .Aluminized and stainless steel is used for all case materials (except control panel)

INDUSTRIAL TYPE ELEMENT CONNECTIONS

• No more crimped element connections!

ELEMENTS

• All Elements in Kiln Have the Same Resistance.
• Elements are Evenly Coiled
• Standard or Optional Heavy- Duty Elements.

CONTROL PANEL WITH BRANCH FUSING, POWER RELAYS AND INDUSTRIAL GRADE WIRING

PROTECTED THERMOCOUPLES

• Thermocouples are heavy-duty 8 gauge
• They are protected with a mullite ceramic tube
• Thermocouples used on JD Models only

OPTIONAL TYPE S PLATINUM THERMOCOUPLES

BUILT TO LAST - EASY TO MAINTAIN

• L&L kilns are designed from the ground up to be easy to maintain yourself with no special tools.
• Dyna-Glow element holders and simple industrial grade element terminations make changing elements the easiest of any kiln.
• The hinged control box is easy to service and, moreover, can be easily detached and sent for expert factory service.
• Our whole design philosophy is to make a kiln that lasts like the production tool it is.
  

"EASY-OPEN, EASY-LOAD" SPRING LOADED HINGE DESIGN AND LID SUPPORT

• Lid is easier to open
• Allows Easy Access for loading kiln with no support bars
• Standard on 12 sided (29" & 28" diameter kilns) and optional on 10 sided (23" & 22" diameter kilns)

STANDARD HINGE ON SMALL JUPITERS IS HEAVY-DUTY

ON/OFF SWITCH & CONTROL FUSE

• Some kilns don't have an On/Off switch!
  

UL / CANADIAN LISTED

• Almost all Jupiter kilns except 480 and 380 volt versions are C-UL-us listed.

SERVICE AND QUALITY WITH A THREE YEAR WARRANTY

• Ask anyone about L&L's unsurpassed 60 year reputation for service and quality products.
• We ship most parts from the factory in less than two days.
• Call us, email us or visit the extensive support section on our web site.

DETACHABLE PANEL WITH PROTECTIVE AIR SPACE

• The control panel is mounted away from kiln heat with air space in between.
• Control, contactors and sensitive components last longer.
• Unplug control quickly to send to factory for expert repairs.
• The panel door is hinged.
• All wiring is neatly laid out for easy maintenance.

REVERSIBLE BOTTOM - JUST IN CASE OF A MISHAP

• The bottom can be easily reversed in case of a firing mishap (except for powered bottoms).
• Sectional construction makes this possible.
  

EASY TO MOVE AND SET UP

• See photos of a JD230 being set up
• Small Jupiters (J18 to J245)
• Large Jupiters (J2900 Series)
• Spring Hinge Set Up
• Jupiter Stand Set Up