INDUSTRIAL TYPE ELEMENT CONNECTIONS WITH SPECIAL MOLDED CERAMIC BLOCKS

• Easy, Secure Connections: Elements are twisted around stainless steel screws mounted on solid ceramic terminal blocks. The entire assembly is mechanically secure and solid.
  
  
• Wide Electrical Contact: All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers.
  
  
• No special tools: Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.
  
  
• Easier than crimped connectors: Ask anyone who has changed an element in both an L&L kiln and other kilns with crimped connections. Many repair people tell us it takes 3 hours to change elements in a other kilns vs. 30 minutes in an L&L. You need to be either very strong or else use a large special crimping tool to properly crimp a terminal. If you don’t get it just right you can ruin the element and wire end. Also every time you change an element you shorten the connecting wire.