EL2436 Front-Loading Kiln

Click on image to enlarge

EL2436 Front-Loading Kiln

Furniture Kit

 H-B-2436/00 ($755.00)
Furniture Kit for EL2436 Easy-Load

Eight 11" x 22" Rectangular Shelves (3/4" thick), Twelve Each 1/2", 1", 2", 4", 6", and 8" Square Posts, Heat Resistant Gloves and 1 pound of Cone 10 Kiln Wash

Questions? Quote?

Send an email to sales@hotkilns.com or
call 800-750-8350.

EL2436 Front-Loading Kiln

Model EL2436 Easy-Load Front-Loading kiln with Multi-Program Three-Zoned DynaTrol, hard ceramic element holders, separate attached stand, cool-firing separate side-mounted panel, multi-layered insulation (3" K23 firebrick with 2" back up mineral wool), full arch 4-1/2" thick firebrick roof made of harder K25 firebrick, side, back and door elements, door gasket, heavy gauge welded case that is powder-coated hammertone blue for corrosion resistance, manual vent system with roof plug and bottom inlet holes with sliding damper. 25" Wide x 26" Deep x 36" High (12 cubic feet) MET-us listed in the USA. Direct power connection. Cone 10 for all voltages.

See this page for Front-Loader Shipping Quote Form and Front-Loader Installation Checklist

$13955

More images

EL2436 closed from the left
Door elements improve uniformity
Door seal features a woven high temperature tadpole gasket
EL2436 Front-Loading Kiln
Positive door clamps lock door tight
Note the ¾” deep plug on the door which acts as a heat lock around the door seal
Shows the vent holes in the bottom controlled by a sliding damper
The cooling vent outlet is a 3" by 1.5" plug in the center of the roof that can be removed by hand
Firebrick plug on roof vent
This shows how the firebrick and backup insulation is constructed with heat-locks, skew bricks and 4-1/2" arch with backup
The control panel is hinged for easy access
Shows air space between control panel and kiln. This results in cooler long-lasting electronics.
Inside the control panel - all wiring is neatly laid out
DynaTrol features four Easy-Fire programs and six Vary-Fire user-defined programs plus zone control
The benefits of zone control
8 Gauge Type K Thermocouple shown with protection tube
Door Switch turns off power when door opens
Wiring shown with the back removed
Power wiring on Easy-Load
Molded Ceramic Element terminal used on Hercules and Easy-Load kilns- easy to disconnect elements and power wiring
An EL2436 loaded with pottery
Adjustable foot pad for leveling kiln
Adjustable very strong fabricated door hinge
3" (76 mm) K23 Premium Firebrick with 2" (50mm) Mineral Wool Back-Up Insulation
Front-Loading
One section
4 sides
12 cubic ft (340 Liters)
1265 pounds (572 Kg)
25" Wide x 26" Deep x 36" High
63.5 cm Wide x 66 cm Deep x 91.4 cm High
47" Wide x 43" Deep x 74" High
119.4 cm Wide x 109.2 cm Deep x 188 cm High
Download (PDF)
Part Number
Watts
Volts
Phase
Fuse Size
K-B-2436/31
19000 W
240 V
Single Phase
100 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2436/32
19000 W
240 V
Three Phase (Delta)
60 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2436/21
19000 W
208 V
Single Phase
125 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2436/22
19000 W
208 V
Three Phase (Delta)
70 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2436/62
19000 W
460-480 V
Three Phase (Delta)
30 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2436/41
19000 W
220-230 V
Single Phase
125 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for non-USA markets only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2436/52
19000 W
380-415 V
Three Phase (Wye)
40 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for non-USA markets only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

No assembly required
Solid steel case (11 gauge) with integrated welded stand. Feet include anchor points and leveling bolts.
Heavy-duty door hinges to the left (special option allows it to be hinged on the right). Door opens all the way so that the door opening is completely unobstructed.
The stand is part of the entire integrated and welded case structure. It includes leveling bolts and holes for anchoring the kiln to the floor.
A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
Solid ceramic peephole plugs with full 1” diameter. Three total: one per section.
Three control zones with three separate thermocouples. More about zone control.
8 Ga Type K Exposed Thermocouple in Mullite Protection Tube (6.5" long /165mm)
Mounted on control panel
Separate attached to right side.
Control box cover is hinged for easy access to inside of control box.

Durability

Arched roofs are the time-proven way to build a long-lasting front-loading kiln
Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Industrial grade ceramic terminal blocks make changing elements easy.
A thick welded steel case holds up better to corrosion over time.
Special brick coating hardens and seals brick for durability and cleaner operation.
Mullite protection tubes extend thermocouple life and keep kiln clean. The mullite protection tube keeps the metal oxides of the thermocouple tip from dropping off and contaminating your work.
Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.

Performance

Zone control gives you the utmost in controllable temperature uniformity. The DynaTrol separately measures temperatures in the bottom, middle and top of the kiln and automatically adjusts the heat output of three zones during the entire firing.
DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control included on most kilns.
This is for cooling purposes and does not replace the Vent-Sure automatic kiln vent.
K23 firebrick combines good insulation with strength

Ease of Use

Solid large non-tapered peepholes allow a wider view into the kiln.
Two strong door latches secure the door. They are adjustable.

Support

Most L&L Kilns have a three-year limited warranty.
The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.

Safety

Shuts off power to kiln when door is open
Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire. Jupiter. DaVinci, School-Master, Liberty-Belle. Hercules & Easy-Load kilns areMET-Us Listed for US only.
Power Relays are mercury-free to comply with increasing regulation and concern about mercury in schools
All L&L Kilns come with an on-off switch

Elements

APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples are recommended for high fire applications

Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity.

Vents

The L&L Vent-Sure Kiln Vent is the most powerful downdraft kiln vent on the market today. That means you have more flexibility in the installation.

The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis). 

Kiln Furniture

Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.

Cone 10 Kiln wash is used to coat shelves to prevent sticking of glaze.

These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

The new Genesis control from Bartlett includes a touch screen interface and WIFI connectivity added to the proven software of the DynaTrol. 

Control, monitor and record data for up to 10 kilns from your computer for a one-time price.

Electronic High Limit Back Up Control acts as an upper limit back up to the main control.

The Eurotherm 2604 is an indutrial-grade PID control with two or three zone cabability built in.

Power

L&L's 480 volt option can include a NEMA 1 control panel

This option helps protect your control from electrical noise

60" Wide x 57" Deep x 80" High
152 cm Wide x 144 cm Deep x 203 cm High
60" Wide x 57" Deep x 80" High and 36" Wide x 36" Deep x 25" High
152 cm Wide x 144 cm Deep x 203 High and 91 cm Wide x 91 cm Deep x 63 cm High
60" Wide x 57" Deep x 80" High and 36" Wide x 36" Deep x 19" High
152 cm Wide x 144 cm Deep x 203 High and 91 cm Wide x 91 cm Deep x 48 cm High
60" Wide x 57" Deep x 80" High and 36" Wide x 36" Deep x 25"
152 cm Wide x 144 cm Deep x 203 High and 91 cm Wide x 91 cm Deep x 63 cm
1330 lbs (603 kg) + Kit 1475 lbs (669 kg) + Vent 1365 lbs (619 kg) + Kit + Vent 1558 lbs (683 kg)
Wooden Crate