Easy-Load Front-Loading Large Production Kilns

Accessories

Control

120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns

This option helps protect your control from electrical noise

Eurotherm Three Zone Industrial Computer Control

The Eurotherm 2604 is an indutrial-grade PID control with two or three...

Kiln Sitter Back-Up Safety Option

This is normally used as a back up to the main automatic control

KISS Computer Interface & Datalogger for DynaTrol Control

Control, monitor and record data for up to 10 kilns from your computer...

Pyrocil Metal Sheathed Industrial Thermocouples

Pyrocil thermocouples are sensitive but limited to about 2200°F and...

Type S Platinum Thermocouples

Type S Platinum Thermocouples are recommended for high fire...

Elements & Power

480 Volt Option

L&L's 480 volt option can include a NEMA 1 control panel and a...

APM Sintered Powder Metal Elements

APM elements increase element life in difficult applications

General

Furniture Kits

Kiln furniture kits are the recommended set of ceramic shelves, posts...

Kiln Wash for Kiln Furniture

Cone 10 Kiln wash is used to coat shelves to prevent sticking of glaze...

Safety Glasses

Dark viewing glasses are necessary for viewing into the kiln when it is...

Safety Gloves

These safety gloves are perfect for handling hot work when unloading a...

Vent

Vent-Sure Downdraft Kiln Vent System

The L&L Vent-Sure Kiln Vent is the most powerful downdraft kiln...

Production Front-Loading Kilns up to 25 Cubic Feet

The Easy-Load front loading kilns are designed for easy loading and even heating in a heavy-duty construction. They feature 3" of firebrick backed up with 2" of mineral wool, Cone 10 operation, DynaTrol program control with three-zone control, ceramic element holders, elements on the door, back and sides, full arched roof construction with extra-strong K25 brick, beefy hinge system, door switch, plug door, gasketed door, integrated stand, optional Orton kiln sitter back-up and a complete selection of sizes up to 25 cubic feet.

Kiln Models

Model No	Cubic Ft	Inside Dim (Inches)
EL2436	12	25" Wide x 26" Deep x 36" High
EL2448	16	25" Wide x 26" Deep x 48" High
EL2848	20	31" Wide x 26" Deep x 49" High
EL3048	25	31" Wide x 32-1/2" Deep x 49" High

Features

Durability

Hard Ceramic Element Holders for Durability

Durability, Repairability, Better Heat Transfer

Arched Roof for L&L Front-Loading Kilns

Arched roofs are the time-proven way to build a long-lasting front-loading kiln

Thermocouple Protection Tubes

Mullite protection tubes extend thermocouple life and keep kiln clean

Powder-Coated Thick Welded Case

A thick welded steel case holds up better to corrosion over time.

Thick 8 Gauge Thermocouples

Thick 8 gauge thermocouples last a long time.

Proprietary Reflective Coating Hardens & Seals Brick

Special brick coating hardens and seals brick for durability and cleaner operation.

Safety

Listed to UL499 Standard by MET

Most L&L kilns are MET listed to UL499 standards

Mercury Free Power Contactors

Power Relays are mercury-free to comply with increasing regulation and concern about mercury in schools

On-Off Switch and Panel Fuse

All L&L Kilns come with an on-off switch

Support

Superior Technical Support

The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.