ALL ELEMENTS ARE THE SAME FOR EASY & ECONOMICAL REPLACEMENT
All Elements in Kiln Have the Same Resistance

• All element resistance values are the same in each kiln.
• There is no need to carefully match elements when replacing elements.
• THIS MEANS THAT YOU CAN REPLACE ONLY ONE OR TWO ELEMENTS IN THE KILN (RATHER THAN A WHOLE EXPENSIVE SET) AND STILL HAVE A UNIFORMLY FIRING KILN!
• Our multi-zone control on both manual and automatic kilns makes this possible.

ELEMENTS ARE EVENLY COILED

• Elements are coiled on a special automatic machine that puts the proper spacing in the coil.
• Evenly coiled elements mean no hot spots and longer element life.
  

HEAVY-DUTY ELEMENTS

• Elements are optimized for firing conditions. The wire gauge is the heaviest possible gauge we can use and still get the optimum watt density and stretch ratio.
• Heavy-duty elements use thicker wire and have a lower watt density (watts per square inch of element surface area). The lower the watts density the cooler the elements can run and the longer they last.