FIRES TO CONE 10 - 2350F - 1287C

• The DaVinci production kilns are unequivocally rated for cone 10 operation (2350F, 1287C).
• They have a higher K.W. power rating than most other ceramic kilns.
• Power Bottoms are available.

3" OF PREMIUM FIREBRICK

• 3" Premium grade K23 firebrick is standard

LARGE 1" DIAMETER PEEPHOLES

• Peepholes are a full one inch diameter and are not tapered.
• Better view inside kiln
• Less chance of breakage

MULTI-ZONE DESIGN

• Whether you order a manual or an automatic, every DaVinci kiln is multi-zoned.
• Each 9" section (and optional powered bottom) has its own separate contactor or manual infinite switch.
• In the case of the four or five section automatic kilns the middle sections operate together as one zone.
• For automatic kilns the optional powered bottom is tied into the bottom zone. However, the DynaTrol allows you to adjust how much of the bottom's power is used (from 10% to 100%).
  

VERSATILITY OF SIZE - SECTIONALIZED CONSTRUCTION

• All DaVinci production kilns are sectionalized.
• You can increase or decrease the size by adding or removing a section.
• Save on electric bills for small loads yet have ample firing capacity.
• Add capacity in the future.
• Control boxes are sized for 5 zones (even on smaller kilns) and extra circuits can be added by the factory in the future if ever needed.

SQUARE AND RECTANGULAR "PLUS" DESIGN

• DaVinci kilns feature a unique shallow arch design that provides a very strong structure and promotes natural convection.

DYNATROL AUTOMATIC CONTROL - WITH FOUR EASY CERAMIC PROGRAMS

• The DynaTrol with "Dynamic Zone Control" replaces manual switches
  and the Dawson kiln sitter/timer. .
• Operation of the kiln, including zone control for even firing, is completely automated.
• There are four easy-to-use "Easy-Fire" ceramic programs.
• There are six user defined programs for more sophisticated firing.

DYNATROL IS IN HANDHELD PANEL

• On DaVinci kilns the DynaTrol is mounted in a separate hand-held box that plugs into the power contactor panel.
• This control box can hang on the wall or a supplied bracket that attaches to the counterbalance pole.
  

DYNAMIC ZONE CONTROL FOR EVEN FIRING

• Dynamic Zone Control automatically controls a top, middle and bottom zone for accuracy better than 1/2 cone top to bottom.
• L&L does not charge extra for this great feature - others do.
  

ON/OFF SWITCH & CONTROL FUSE

Manual DaVinci Kilns Feature...

MULTI-ZONE CONTROL WITH INFINITE ZONE SWITCHES

• Infinitely variable input switches (one for each section) adjust thermal gradients to prevent uneven heating. These control the power contactors.
• They are more adjustible than simple High-Medium-Low type switches.
• Switches have an off position.
  

DAWSON KILN SITTER/TIMER

• A Dawson LT3 (with back-up safety timer) shuts kiln off.
• The Dawson is mounted several inches away from kiln case (with air in between) in its own separate panel box to keep it cool and improve the contactor life.

PILOT LIGHTS FOR EACH ZONE

OPTIONAL TRU-VIEW PYROMETER SYSTEM

More Options to customize your DaVinci Kiln...

OPTIONAL POWER VENT-SURE KILN VENT

• Safest Vent Made - fumes are under vacuum
• Strongest Vent Made - you can vent two kilns
• Most Durable Vent Made - the motor is away from the heat
• We suggest using one per every 20 cubic feet of kiln interior.
  

OPTIONAL BOTTOM ELEMENTS

• Optional bottoms with elements are available for the X2800, X3200, T2300 and T3400 Series.

OPTIONAL 480 VOLTS

OPTIONAL DAWSON KILN SITTER FOR BACK UP SAFETY

• A Dawson kiln sitter (without timer) may be optionally ordered as a back-up device for an additional $450.
• This will shut off the kiln in the event of a control malfunction.
  

OPTIONAL 120 VOLT CONTROL POWER WITH NOISE FILTER

• This option is for people with unstable power grids. (Adds $225)

DYNA-GLOW CERAMIC ELEMENT HOLDERS

• Protects Firebrick - Results in Much Longer Kiln Life.
  
• Better Heat Distribution
• Protects Element
• Protects rim of kiln by structurally supporting brick
• The shallow cut required by the unique L&L Dyna-Glow element holders makes brick even more energy efficient.

BRICK HARDENED WITH SPECIAL COATING & HARDENER

• This is one reason L&L Kilns last so long
• The shallow cut required by the unique L&L Dyna-Glow element holders makes brick even more energy efficient.
• Every exposed brick surface is coated

REVERSIBLE BOTTOM

HEAVY-DUY WELDED FRAME BOTTOM

• Includes Aluminized Steel Full-Support Plate
  

THREE ADJUSTABLE CASE CLAMPS PER SECTION

STAINLESS STEEL CLIPS & RIGID STEEL LID FRAME

• Will Support Even Cracked Lids
  

CORROSION RESISTANT MATERIALS

• .Aluminized and stainless steel is used for all case materials (except control panel)

FLOOR STANDING DETACHED CONTROL PANEL WITH

BRANCH FUSING, POWER RELAYS AND INDUSTRIAL GRADE WIRING

INDUSTRIAL TYPE ELEMENT CONNECTIONS
WITH SPECIAL CERAMIC BLOCKS

• No more crimped element connections!

HEAVY-DUTY ELEMENTS

• Last Up to four times longer
• Elements are evenly coiled
• All elements are the same resistance for easy replacement

PROTECTED THERMOCOUPLES

• Thermocouples are heavy-duty 8 gauge
• They are protected with a mullite ceramic tube which makes the thermocouple last longer and prevents metallic dusting in the kiln

OPTIONAL TYPE S PLATINUM THERMOCOUPLES

BUILT TO LAST - EASY TO MAINTAIN

• L&L kilns are designed from the ground up to be easy to maintain yourself with no special tools.
• Dyna-Glow element holders and simple industrial grade element terminations make changing elements the easiest of any kiln.
• The hinged control box is easy to service and, moreover, can be easily detached and sent for expert factory service.
• Our whole design philosophy is to make a kiln that lasts like the production tool it is.
  

UNIQUE SPRING-LOADED COUNTERBALANCED LID

• Opens easily
• Less wear & tear on lid
• Rigid Frame around lid maintains integrity of lid brick
• Adjusts up & down

ON/OFF SWITCH & CONTROL FUSE

• Some kilns don't have an On/Off switch!
  

UL / CANADIAN LISTED

• All DaVinci Series kilns including manual, automatic, single phase, three phase and those with powered bottoms are C-UL-us listed.
• 480 and 380 volt kilns are not listed but are made to National Electrical Code standards.
• Also we make higher powered XB and TB versions of the DaVincis in 27", 36" and 45" high models that are not c-UL-us listed.

SERVICE AND QUALITY WITH A THREE YEAR WARRANTY

• Ask anyone about L&L's unsurpassed 58 year reputation for service and quality products.
• We ship most parts from the factory in less than two days.
• Call us, email us or visit the extensive support section on our web site.

DETACHABLE PANEL WITH PROTECTIVE AIR SPACE

• The control panel is mounted away from kiln heat with air space in between.
• Control, contactors and sensitive components last longer.
• Unplug control quickly to send to factory for expert repairs.
• The panel door is hinged.
• All wiring is neatly laid out for easy maintenance.

BUILT TO LAST - EASY TO MAINTAIN

REVERSIBLE BOTTOM - JUST IN CASE OF A MISHAP

• The bottom can be easily reversed in case of a firing mishap (except for powered bottoms).
• Sectional construction makes this possible.
  

EASY TO MOVE AND SET UP

• Because the DaVinci kilns come in 9" high sections, they can be easily moved and set up. They can be moved through any standard 32" wide doorway because even the largest sections can be turned on their side. There are four chest handles on each section for easy lifting and moving.